BPIT, Inc. - Model T100H  High Range UV Fluorescence SO2 Analyzer (Available with Numaview™software upon request)

Model T100H High Range UV Fluorescence SO2 Analyzer (Available with Numaview™software upon request)

By: Teledyne Instruments API

The Model T100H High Range UV Fluorescence SO2 analyzer uses the proven UV fluorescence principle and advanced electronics to allow accurate, dependable, continuous measurements for high concentration stack gas monitoring and other applications.

— Available with NumaView™ premium T Series software —

BPIT, Inc. - Quotation icon Get a quote »


  • Ranges: 0-10 ppm to 0-5,000 ppm, user selectable
  • Dual ranges
  • Optional O2 and/or CO2 sensor(s) available
  • Large, vivid, and durable color graphics display with touch screen interface
  • Ethernet, RS-232, and (optional) USB com ports
  • Front panel USB connections for peripheral devices and firmware upgrades
  • 8 analog inputs (optional)
  • Adaptive signal filtering optimizes response time
  • Temperature & pressure compensation
  • Fast response (<30 seconds to 95%)
  • Comprehensive internal data logging with programmable averaging periods
  • Ability to log virtually any operating parameter
  • Two-year warranty



Min: 0 - 10 ppm full scale Max: 0 - 5,000 ppm full scale (selectable with dual range supported)

Measurement Units

ppm, mg/m3 (selectable)

Zero Noise

0.1 ppm (RMS)

Span Noise

< 1% of reading (RMS) above 10 ppm

Lower Detectable Limit

0.2 ppm

Zero Drift

< 1 ppm/24 hours

Span Drift

< 0.5% of full scale/24 hours

Lag Time

5 seconds

Rise/Fall Time

< 30 seconds to 95%


1% of full scale


0.5% of reading above 10 ppm

Sample Flow Rate

700 cc/min ±10%

Power Requirements

100V-120V, 220V-240V, 50/60 Hz

Analog Output Ranges

10V, 5V, 1V, 0.1V (selectable)

Recorder Offset


Included I/O

1 x Ethernet: 10/100Base-T 

2 x RS232 (300-115,200 baud)

2 x USB device ports

8 x opto-isolated digital outputs

6 x opto-isolated digital inputs 

4 x analog output

Optional I/O

1 x USB com port 

1 x RS485

8 x analog inputs (0-10V, 12-bit)

4 x digital alarm outputs

Multidrop RS232

3 x 4-20mA current outputs

Operating Temperature Range

5 - 40ºC

  Dimensions (HxWxD)

7” x 17” x 23.5” (178 x 432 x 597 mm)


Analyzer: 31 lbs (16 kg)

External pump: 15 lbs (7 kg