The AllerGard ES 619 Cage Changing Station offers ISO Class 4 protection for research animals providing allergen protection shed by animals and bedding. The 619 improves productivity offering personnel comfort and convenience through ergonomic design.
The AllerGard 619 provides 10” maximum knee/thigh clearance that improves the users ability to assume a proper posture.
An adjustable base stand provides the ability for laboratory personnel to optimize ergonomic conditions.
Mobility in the Animal Facility:
Improved large stainless steel caster design allows the 619 to be moved from room to room, through standard doors and hallways.
Push Pull Airflow System
Room air passes through the pre-filter to the supply HEPA filter and is pushed downward in a uniform vertical pattern onto the work surface. Mixed air on the work surface is pulled through the work surface grills; passing through the 4-stage exhaust pre-filter and exhaust HEPA filter before being discharged back into the room. This airflow system creates exceptional sterility and protection for the research animal. Technicians are protected from animal shed allergens; these are effectively retained by the pre-filter system and the exhaust HEPA filter.
Work Surface Isolation Zones
The work surface is divided into either 2 or 4 isolation zones by a cross grill pattern of perforated vacuum slots that are placed down the center and around the outer edges of the work surface. The motor/blower underneath the work surface draws air through the vacuum slots at a slightly stronger velocity. This airflow creates an air barrier around each of the 2 or 4 zones created by the vacuum slots. The 4-zone work surface provides areas for cage changing; the 2-zone work surface provides extra workspace for procedures.
Energy Saver Motor
An ultra high efficiency motor saves on your energy bills while increasing filter life lowering your total cost of ownership.
Unidirectional airflow moving along parallel flow lines at a constant velocity of 80 fpm (0.51 m/s) minimizes air turbulence within the work zone lessening the chance for cross contamination.
Vibration and sound control.
|Nominal Size||3 ft. (0.9 m)||4 ft. (1.2 m)||5 ft. (1.5 m)|
|Sash Height||14" (356 mm)||14" (356 mm)||14" (356 mm)|
|Exterior Dimensions (W x D x H)
|42* x 30 x 79 â…›
(1067* x 762 x 2010)
|48* x 30 x 79 â…›
(1219* x 762 x 2010)
|60* x 30 x 79 â…›
(1524* x 762 x 2010)
|Interior Dimensions (W x D x H)
|36 â…œ x 28 ¼ x 26
(873 x 664 x 659)
|42 â…œ x 28 ¼ x 26
(1083 x 664 x 659)
|54 â…œ x 28 ¼ x 26
(1387 x 664 x 659)
|Weight||430 lbs. / 195 kg.||460 lbs. / 209 kg.||530 lbs. / 240 kg.|
|Downflow Velocity||80 fpm (0.40 m/s)||80 fpm (0.40 m/s)||80 fpm (0.40 m/s)|
|Light Intensity foot-candles (LUX)||150 (1614)||150 (1614)||150 (1614)|