The Douglas Machine Model 2554-SPW Scale Parts Washer is designed to quickly and efficiently clean scale parts such as weigh and feed buckets, chutes, funnels, feed pans and other detachable items.
Design & Operation:
Designed for batch type operation where the wash rack is loaded with items to be cleaned.
After the door is closed, the short, medium or long wash cycle is selected, which then initiates a 150° F. recirculating detergent wash followed by a 180° F. final fresh water sanitizing rinse.
The final sanitizing rinse water flows into the recirculated wash tank for reuse and freshening causing excess water to overflow to drain.
A buzzer and unload light indicates cycle completion.
The door is then reopened for unloading and reloading for the next cycle.
Booster heaters maintain proper operating temperatures.
60” wide x 77” deep x 97 5/8” high. Overall footprint is 66” wide x 103 1/2” deep.
(105” overall clearance height when floor mounted, 91” when used in a pit).
Door Opening: 36” wide x 76 1/2” high. Wash Chamber: 36” wide x 65 1/2” deep x 76 1/2” high.
Constructed of #14 gauge, 300 Series
STAINLESS STEEL with a #3 finish. All seams, excluding filter section, are tig or mig welded and
|Wash Pump:||25 HP|
|Floor Space:||66" wide, 98 1/2" deep|
|Wash Chamber:||34" wide, 65 1/2" deep, 74 1/2" high|
|Rotating Hubs:||4 each side|
|Sheet Pan Capacity:||32 Hoppers & 16 Feeder Pans|
* For more detailed specification, please contact BP Integrated Technologies, Inc.