This Douglas Machine 2566 features a front mounted pump design, 25 H.P. motor and a 66 pan capacity.
Design & Operation:
Designed for batch type operation where the wash rack is loaded with items to be cleaned.
After the door is closed, the short, medium or long wash cycle is selected then which initiates a 150° F. recirculating detergent wash followed by a 180° F. final fresh water sanitizing rinse.
The final sanitizing rinse water flows into the recirculated wash tank for reuse and freshening causing excess water to overflow to drain.
A buzzer and unload light indicates cycle completion.
The door is then reopened for unloading and reloading for the next cycle.
Booster heaters maintain proper operating temperatures.
70” wide x 90” deep (100” for pass through option) x 101 1/2” high (128 1/2” overall clearance height when floor mounted, 114 1/2” when used in a pit. Add 7” with gas heated rinse tank).
Door Opening: 38” wide x 84” high. Wash Chamber: 38” wide x 72” deep x 84” high.
Constructed of #14 gauge, 300 Series STAINLESS STEEL with a #3 finish.
All seams are tig or mig welded. Seams, where needed for watertight construction, are continuously welded.
All other seams are stitch welded for strength.
All welds are cleaned inside, cleaned and buffed outside.
Optional continuous welds in lieu of stitch welds available.
|Wash Pump:||25 HP|
|Floor Space:||70" wide, 90" deep|
|Wash Chamber:||38" wide, 72" deep, 84" high|
|Rotating Hubs:||4 each side|
|Sheet Pan Capacity:||66 per cycle, 660 per hour|
* For more detailed specification, please contact BP Integrated Technologies, Inc.