For double the capacity, consider the Douglas Machine Model SD-20. It has the same split-door design, but a 7.5 H.P. pump and a flexible racking system that holds up to 20 pans.
Design & Operation:
Designed for batch type operation where the wash rack is loaded with items to be cleaned.
After the door is closed, the short, medium or long wash cycle is selected then which initiates a 150° F. recirculating detergent wash followed by a 180° F. final fresh water sanitizing rinse.
The final sanitizing rinse water flows into the recirculated wash tank for reuse and freshening causing excess water to overflow to drain.
A buzzer and unload light indicates cycle completion.
The door is then reopened for unloading and reloading for the next cycle.
50” wide x 36” deep x 71 1/8” high (86 1/8” overall clearance height with door open, 102” with gas heated rinse tank).
Door Opening: 40” wide x 28 1/2” high. Wash Chamber: 38 3/4” wide x 26 3/8” deep x 28 1/2” high.
Constructed of #16 gauge, 300 Series STAINLESS STEEL with a #3 finish. All seams are tig welded.
Seams, where needed for watertight construction, are continuously welded.
All other seams are stitch welded for strength.
All welds are cleaned inside, cleaned and buffed outside. Optional continuous welds in lieu of stitch welds available.
Front loading, split type design for easy loading and unloading.
The top half of the door system rises while the lower half folds down to create a space-saving drain table.
Door is interlocked with limit switch to prevent machine operation while door is open.
Constructed of #14 and #18 gauge, 300 Series STAINLESS STEEL with a #3 finish.
Recirculating Wash Tank:
Constructed of #14 gauge, 300 Series STAINLESS STEEL, heated by 12 KW electric immersion heaters (infrared gas, live steam or steam coil options are available).
Complete with low water protection, automatic fill, 1 1/4” NPT overflow connection, 1 1/4” gate drain valve, thermometer, pressure gauge and is thermostatically controlled. 36 gallon tank capacity (27 if gas heated), sloped to drain.
Optional automatic pump operation for elevated drain locations is available complete with 1/14 H.P., 120 volt, single-phase drain pump.
|Was Pump:||7.5 HP|
|Floor Space:||50" wide, 36" deep|
|Door Opening:||40" wide, 28 1/2" high|
|Sheet Pan Capacity:||20 per cycle, 200 per hour|
* For more detailed specification, please contact BP Integrated Technologies, Inc.